Technical and environmental long-term properties of industrial residues – Summary of field and laboratory investigations

Autor: Maria Arm, Pascal Suèr, Håkan Arvidsson, Jan Erik Lindqvist
Rok vydání: 2011
Předmět:
Zdroj: Waste Management. 31:101-107
ISSN: 0956-053X
DOI: 10.1016/j.wasman.2010.09.004
Popis: In Sweden, use of industrial residues is still hindered by concern for their long-term properties. A three-year research project was therefore initiated aiming to (1) identify the crucial processes of ageing related to the usefulness of residues in roads; (2) investigate the consequences of these processes for technical and environmental properties of the residues, and (3) propose a method for accelerated ageing to predict the long-term properties. This paper gives an overview of the project methodology, a summary of the test results and references to papers where further details are given. The project, running through 2006–2008, compared naturally aged samples of two residues used as sub-bases in existing asphalt paved roads with samples of fresh residues from producers’ piles. Steel slag of electric arc furnace (EAF) type and municipal solid waste incinerator (MSWI) bottom ash were chosen. The samples were thoroughly characterised in order to identify which ageing processes had been crucial. The results showed that: - Bottom ash from the pavement edge was more aged than bottom ash from the road centre. However, no difference in pH was found, instead the differences were caused by differences in water exposure. - Steel slag from the pavement edge showed traces of carbonation and leaching processes, whereas slag from the road centre was identical to fresh slag. - Water exposure to the subbase materials after ten years in an asphalt paved road was calculated to less than 0.1–0.5 litres per kg. - Ageing reactions in steel slag and MSWI bottom ash, ready for use, were too small to be verified by laboratory measurement of deformation properties under loaded conditions. An accelerated ageing test for steel slag was set up to achieve the carbonation (decrease in pH) and leaching that was observed in the pavement edge material. An accelerated ageing test for bottom ash was set up to achieve the pozzolan reactions that were observed in SEM analyses of in situ specimens. It is recommended to use uncrushed particles when properties of aged material are studied, in order to preserve the original particle surfaces.
Databáze: OpenAIRE
Externí odkaz: