Re-usage of waste foundry sand in high-strength concrete
| Autor: | Muhsin Yalcin, Senayi Dönmez, Ahmet Tuncan, Yasin Dursun Sari, Yücel Güney |
|---|---|
| Přispěvatelé: | Anadolu Üniversitesi, Yer ve Uzay Bilimleri Enstitüsü, Güney, Yücel, Yalçın, Muhsin |
| Rok vydání: | 2009 |
| Předmět: |
Compressive Strength
Construction Materials Industrial Waste Materials testing Industrial waste Slump Compressive strength Waste Management Tensile Strength Test program Ultimate tensile strength Materials Testing Metallurgy Environmental science Geotechnical engineering Foundry Waste Management and Disposal High strength concrete |
| Zdroj: | Waste management (New York, N.Y.). 30(8-9) |
| ISSN: | 1879-2456 |
| Popis: | WOS: 000279493100033 PubMed ID: 20219339 In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly related to waste foundry inclusion in concrete. Nevertheless the concrete with 10% waste foundry sand exhibits almost similar results to that of the control one. The slump and the workability of the fresh concrete decreases with the increase of the waste foundry sand ratio. Although the freezing and thawing significantly reduces the mechanical and physical properties of the concrete. The obtained results satisfies the acceptable limits set by the American Concrete Institute (Ad) Anadolu University [031010] This research has been supported by the Anadolu University Research Fund under Project Number 031010. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect