Proppant Transport in a Newtonian Fluid Under Laminar Flow
| Autor: | Guillaume Ovarlez, Arthur Gadon, Hugues Bodiguel, Nidal Ben Abdelouahab, Steven Meeker |
|---|---|
| Přispěvatelé: | Laboratory of Future (LOF), Université de Bordeaux (UB)-Centre National de la Recherche Scientifique (CNRS)-Solvay (France) |
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Materials science
Energy Engineering and Power Technology Laminar flow 02 engineering and technology Mechanics 010502 geochemistry & geophysics Geotechnical Engineering and Engineering Geology 01 natural sciences Open-channel flow 020401 chemical engineering Newtonian fluid 0204 chemical engineering [PHYS.COND.CM-SCM]Physics [physics]/Condensed Matter [cond-mat]/Soft Condensed Matter [cond-mat.soft] ComputingMilieux_MISCELLANEOUS 0105 earth and related environmental sciences |
| Zdroj: | SPE Journal-Richardson SPE Journal-Richardson-, SPE Inc., 2020, ⟨10.2118/201097-PA⟩ |
| ISSN: | 1086-055X |
| Popis: | Summary Model proppant transport experiments are conducted at the laboratory scale using a Newtonian carrier fluid in a long tube of rectangular cross section. Under the particular flow conditions studied, we observe the buildup of a dense but flowing sediment, which rapidly reaches a steady-state height. The existence of this steady-state flowing sediment implies that the proppant flux leaving the channel equals that entering the channel; that is, “efficient” proppant transport occurs. As soon as the suspension flow is stopped, the fluidized sediment ceases flowing and quickly becomes more compact. This collapse implies that the particle sediment is maintained in an expanded state while under flow, with an average volume fraction considerably lower than that under static conditions. The relevant mechanism of sediment transport is identified as viscous resuspension because the flow is at a low Reynolds number (Re at approximately 0.1). We estimate the average volume fraction of the resuspended sediment from experimental measurements of the “expanded” flowing sediment height, with the assumption that the corresponding compact sediment volume fraction is ϕ0=0.61, the volume fraction at which the suspension viscosity diverges. Predictions of the resuspended sediment heights are made with a simple approach based on the diffusive flux model by Leighton and Acrivos (1986) using the average shear stress across the channel width. A good agreement is found between the predicted and experimental values, indicating that 2D effects remain weak. Microscopic observations show that the sediment is fully fluidized while under flow for all the flow rates studied in our channel, and one does not observe the buildup of static sediment banks that are observed in larger-scale tests during the suspension flow (Kern et al. 1959; Babcock et al. 1967; Schols and Visser 1974; Sievert et al. 1981). This apparent difference is explained in the context of the viscous resuspension model. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|