The influence of in situ synthesis parameters on the formation of ZnO nanoparticles and the UPF value of cotton fabric
| Autor: | Marija Gorjanc, Martin Šala, Anja Verbič |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2018 |
| Předmět: |
In situ
in situ synthesis Materials science it was found that longer treatment times after the reducing agent was added produced functionalised cotton fabric with higher UPF values. The drying period duration after in situ synthesis did not signifi cantly affect the UPF value of the fabric Polymers and Plastics round shaped nanoparticles. From the second part of the research cotton Industrial and Manufacturing Engineering UV radiation lcsh:TP890-933 parasitic diseases such as the synthesis time ratio (time ratio between the treatment of the fabric in the precursor (ZnCl2) and treatment after the reducing agent was added) and drying period duration after the in situ synthesis. Using UV/Vis spectroscopy UV protection Business and International Management KOH high UPF values (UPF 50+) were measured for cotton fabrics where in situ synthesis was performed using NaOH and KOH technology industry and agriculture zinc oxide both at 1 M molar concentration. Inductively coupled plasma mass spectrometry (ICP-MS) revealed a higher content of zinc on the fabric when NaOH was used. Scanning electron microscopy (SEM) showed that use of this reducing agent resulted in cotton fabric completely covered with small General Business Management and Accounting but it did influence the morphology of the synthesised nanoparticles. With a longer drying time the nanoparticles were more rounded. The samples had poor wash fastness even after the fi rst wash Chemical engineering Zno nanoparticles nanoparticles lcsh:Textile bleaching dyeing printing etc and NaOH) and their molar concentrations (0.1 M and 1 M) on the formation of ZnO nanoparticles and on the UPF values of cotton fabric were studied. The second part of the research was focused on the other parameters of in situ synthesis Value (mathematics) |
| Zdroj: | Tekstilec, Vol 61, Iss 4, Pp 280-288 (2018) |
| ISSN: | 2350-3696 0351-3386 |
| Popis: | The aim of this research was to investigate different parameters of the in situ synthesis of ZnO nanoparticles on cotton in order to achieve a high ultraviolet protection factor (UPF). In the fi rst part of the research the influence of different reducing agents (Na2CO3, KOH, and NaOH) and their molar concentrations (0.1 M and 1 M) on the formation of ZnO nanoparticles and on the UPF values of cotton fabric were studied. The second part of the research was focused on the other parameters of in situ synthesis, such as the synthesis time ratio (time ratio between the treatment of the fabric in the precursor (ZnCl2) and treatment after the reducing agent was added) and drying period duration after the in situ synthesis. Using UV/Vis spectroscopy, high UPF values (UPF 50+) were measured for cotton fabrics where in situ synthesis was performed using NaOH and KOH, both at 1 M molar concentration. Inductively coupled plasma mass spectrometry (ICP-MS) revealed a higher content of zinc on the fabric when NaOH was used. Scanning electron microscopy (SEM) showed that use of this reducing agent resulted in cotton fabric completely covered with small, round shaped nanoparticles. From the second part of the research, it was found that longer treatment times after the reducing agent was added produced functionalised cotton fabric with higher UPF values. The drying period duration after in situ synthesis did not signifi cantly affect the UPF value of the fabric, but it did influence the morphology of the synthesised nanoparticles. With a longer drying time the nanoparticles were more rounded. The samples had poor wash fastness even after the fi rst wash, which was found through low UPF values. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|