Mechanical Behavior of Calcium Sulphate Modified with Citric Acid and with Added Carbon Fibers

Autor: José Antonio Flores Yepes, Luis Miguel Serna Jara, Juan Manuel Berná Serna, Antonio Martínez Gabarrón, Ana Maria Codes Alcaraz
Jazyk: angličtina
Rok vydání: 2022
Předmět:
Zdroj: Polymers; Volume 14; Issue 8; Pages: 1522
ISSN: 2073-4360
DOI: 10.3390/polym14081522
Popis: The study and subsequent analysis of the interaction of calcium sulfate with added citric acid and with two additional proportions of carbon fibers of different lengths has been based on the IMR and D Method for its realization. The purpose of this work is the study of the physical and mechanical behavior of the resulting material between the intimate mixture of calcium sulfate with additives and carbon fibers, justifying said work with a link to the Sustainable Development Goals (SDG) regarding the benefits that the Calcium sulfate has contributed to civil society since times dating back to ancient Egypt. We find ourselves with a material of which the energy used in its manufacture is far from that required by steel or cement, and construction with this new compound is in a much higher stage than construction with adobe. Therefore, this is a compound that can be developed for a wide variety of applications. The novelty of this study is the inclusion of polymeric fibers in a material used over the centuries to improve its mechanical properties. With these improvements we will be able to reduce thicknesses in manufacturing, which implies a reduction in manufacturing energy and weight structures in buildings, which should be studied and analyzed in the future. The kneading of calcium sulfate with long fibers at high percentages complicates not only the results, but also the manufacturing process. As representative results of the study, we can indicate that a composite material with high mechanical capacity has been achieved, with maximum values of flexural strength of 8.12 N/mm2 and compression strength of 17.58 N/mm2.
Databáze: OpenAIRE
Nepřihlášeným uživatelům se plný text nezobrazuje