Effect of water depth on diffusible hydrogen on wet welds
Autor: | Ezequiel Caires Pereira Pessoa, Weslley Carlos Dias da Silva, Alexandre Queiroz Bracarense |
---|---|
Rok vydání: | 2012 |
Předmět: | |
Zdroj: | Soldagem & Inspeção, Volume: 17, Issue: 4, Pages: 298-305, Published: DEC 2012 Soldagem & Inspeção v.17 n.4 2012 Revista soldagem & inspeção Associação Brasileira de Soldagem (ABS) instacron:ABS |
ISSN: | 0104-9224 |
DOI: | 10.1590/s0104-92242012000400004 |
Popis: | Em soldagem subaquática molhada, a ocorrência de poros e trincas a frio pode ter um efeito bastante prejudicial nas propriedades mecânicas da junta soldada. O hidrogênio contribui diretamente para o aparecimento destas duas descontinuidades. A quantidade de hidrogênio difusível (Hdif) no metal de solda pode ser influenciada por diversos fatores. Todavia, pouco se sabe sobre a influência da profundidade de soldagem (pressão) sobre a quantidade de Hdif no metal de solda. Neste trabalho, diversas medições de hidrogênio difusível foram feitas nas profundidades de 0,30 m, 10 m e 20 m e 30 m em soldagem molhada. O consumível utilizado foi o eletrodo comercial E6013 envernizado. As medições de hidrogênio difusível foram feitas através do método da cromatografia. Para medição de porosidade foi utilizado o método macrográfico e um programa analisador de imagem. O hidrogênio residual também foi medido. Os resultados mostraram que o hidrogênio difusível reduziu significativamente com o aumento da pressão hidrostática ao contrário da porosidade, que aumentou com o aumento da pressão hidrostática. Não se observou alterações apreciáveis no hidrogênio residual do metal de solda. Desta forma, é possível concluir que a profundidade de soldagem afeta diversos aspectos da soldagem subaquática molhada, em especial, o hidrogênio difusível e porosidade, conforme foi observado neste trabalho. In underwater wet welding, cold cracking and pores might have a deleterious effect in the mechanical properties of welded joint. The hydrogen might act in the occurrence of theses discontinuities. The amount of diffusible hydrogen in the weld metal can be influenced by several factors. However, not yet known whether the depth of welding (pressure) affects the amount of diffusible hydrogen in weld metal. In this work, several measurements of diffusible hydrogen were made at following depth: 0.30 m, 10 m, 20 m and 30 m atwet welding. The electrode used was commercial waterproofed E6013. The diffusible hydrogen measurements were made through the gas chromatography method following the AWS D3.6M procedure. The porosity was measured using the macrographic method and an image analyser program. The residual hydrogen also was measured. The results showed that diffusible hydrogen reduced substantially as the hydrostatic pressure increased. The porosity increased as the hydrostatic pressure increased. It was not observed changes in the residual hydrogen of the weld metal. So, it is possible to conclude that the welding depth affects several aspects of the underwater wet welding, in special, the diffusible hydrogen and porosity. |
Databáze: | OpenAIRE |
Externí odkaz: |