Wetting behavior and remarkable durability of amphiphobic aluminum alloys surfaces in a wide range of environmental conditions

Autor: M. Raimondo, Guia Guarini, Aurora Caldarelli, Federico Veronesi, Magda Blosi
Rok vydání: 2014
Předmět:
Zdroj: Chemical engineering journal ( Print) 258 (2014): 101–109. doi:10.1016/j.cej.2014.07.076
info:cnr-pdr/source/autori:Raimondo, Mariarosa; Blosi, Magda; Caldarelli, Aurora; Guarini, Guia; Veronesi, Federico/titolo:Wetting behavior and remarkable durability of amphiphobic aluminum alloys surfaces in a wide range of environmental conditions/doi:10.1016%2Fj.cej.2014.07.076/rivista:Chemical engineering journal ( Print)/anno:2014/pagina_da:101/pagina_a:109/intervallo_pagine:101–109/volume:258
ISSN: 1385-8947
Popis: In this work the amphiphobic behavior and durability of engineered aluminum alloy surfaces are highlighted. Functional, hybrid organic inorganic coatings were obtained by a classic sol gel route, followed by a controlled dipping on the substrate in order to achieve surface nanostructuring. The characterization of surfaces revealed outstanding results in terms of static contact angle (higher than 170 degrees) and hysteresis (lower than 5 degrees) with water, as well of contact angle (about 145 degrees) with low-surface tension liquids. In relationship with the latest scientific improvements on this topic, the development of materials coupling favorable static and dynamic repellence against low-surface tension liquids can find applications as corrosion protective components, stain-resistant and self-cleaning materials, de-icing or anti-biofouling paints, and so on. In each area, one of the most important issue to be concerned is the materials' ability to withstand adverse conditions (i.e. attacks by chemical agents and wearing phenomena), avoiding the quick loss of superhydrophobicity/oleophobicity. In this context, functional coatings developed on aluminum alloy stand out for the excellent capability of keeping unchanged their performances over the time and after simulation of rather severe working environments, matching by this way some of the basic requirements connected with their employment as innovative industrial structural materials and components. (C) 2014 Elsevier B.V. All rights reserved.
Databáze: OpenAIRE
Externí odkaz: