The effect of custom carbon ankle-foot orthosis alignment on roll-over shape and center of pressure velocity
| Autor: | Mitchell D Ruble, Elizabeth Russell Esposito, Andrea J Ikeda, Jason M. Wilken |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Prosthetics & Orthotics International. 45:147-152 |
| ISSN: | 1746-1553 0309-3646 |
| DOI: | 10.1177/0309364620971407 |
| Popis: | Maintaining an optimal rolling of the foot over the ground is thought to increase the stability and efficiency of pathologic gait. Ankle-foot orthoses are often prescribed to improve gait mechanics in individuals with lower extremity injuries; however, their design may compromise how the foot rolls over the ground.The aim of this study was to investigate the effects of the sagittal plane ankle-foot orthosis alignment on roll-over shape and center of pressure velocity in individuals with lower limb reconstructions.Randomized cross-over study with a control group comparison.In total, 12 individuals with lower limb reconstruction who used a custom carbon ankle-foot orthosis and 12 uninjured controls underwent gait analysis. Ankle-foot orthosis users were tested in their clinically-provided ankle-foot orthosis alignment, with an alignment that was 3° more plantarflexed, and with an alignment that was 3° more dorsiflexed. Components of roll-over shape and center of pressure velocity were calculated from heel strike on the ankle-foot orthosis limb to contralateral heel strike.Roll-over shape radius was not affected by 3° changes to alignment and was not significantly different from controls. Aligning the ankle-foot orthosis in more dorsiflexion than clinically provided resulted in a smaller peak center of pressure velocity that occurred later in stance.Individuals using custom carbon ankle-foot orthoses can accommodate 3° alterations in the dorsiflexion or plantarflexion alignment. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|