Influence of processing conditions on the quality of briquettes produced by recycling charcoal dust
| Autor: | J.K. Tanui, John Mburu Ngugi, P.N. Kioni, Peter Ngugi Kariuki |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Briquette
Thermal properties Environmental Engineering Materials science 020209 energy lcsh:TJ807-830 lcsh:Renewable energy sources Compaction 02 engineering and technology Combustion Briquettes 0202 electrical engineering electronic engineering information engineering lcsh:TA170-171 Charcoal Water content Charcoal dust Physical properties Pulp and paper industry lcsh:Environmental engineering Molasses binder General Energy High pressure visual_art visual_art.visual_art_medium Heat of combustion Mass fraction |
| Zdroj: | International Journal of Energy and Environmental Engineering, Vol 9, Iss 3, Pp 341-350 (2018) |
| ISSN: | 2251-6832 2008-9163 |
| DOI: | 10.1007/s40095-018-0275-7 |
| Popis: | Physical and thermal properties of briquettes produced by recycling charcoal dust under different processing conditions have been reported in this study. The main aim was to investigate the effects of the binder and processing conditions on the properties of briquettes. The effect of adding molasses binder on combustion properties of the briquette was first assessed. Then by fitting experimental data, mathematical models to predict gross calorific value, ash content, moisture content, relaxed density and shatter index with respect to binder mass fraction, drying temperature and compaction pressure were developed. All briquettes properties were predominantly affected by amount of molasses used. Molasses mass fraction increment in briquette results in significant increment in ash content, moisture content, relaxed density and shatter index and significant reduction in gross calorific value. Drying temperature did not have major influence on briquette properties except moisture content. Compaction pressure (50–150 MPa) used in this study had negligible influences on all briquette properties. Therefore, such high pressure which involves energy consumption is not necessary during production of charcoal dust briquettes. Optimized values of gross calorific value and shatter index were 29.031 MJ/kg and 80.363%, respectively, for 50 MPa compaction pressure, 29.512 °C drying temperature and 10% molasses mass ratio. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink