Edge chipping of translucent zirconia
| Autor: | Maharaj Singh, Geoffrey A. Thompson, David W. Berzins, Joseph D. Flask |
|---|---|
| Rok vydání: | 2022 |
| Předmět: |
Ceramics
Universal testing machine Toughness Materials science Surface Properties Diamond 030206 dentistry Esthetics Dental Edge (geometry) engineering.material Dental Materials 03 medical and health sciences Tetragonal crystal system 0302 clinical medicine Phase (matter) Phase composition Materials Testing engineering Cubic zirconia Zirconium Oral Surgery Composite material |
| Zdroj: | The Journal of Prosthetic Dentistry. 127:793-800 |
| ISSN: | 0022-3913 |
| DOI: | 10.1016/j.prosdent.2020.12.009 |
| Popis: | More translucent dental zirconias have been developed by incorporating the cubic phase and reducing the tetragonal phase content that undergoes transformation toughening, leading to reduced mechanical properties. Whether the clinically relevant mechanical property of the edge chipping toughness of the material is also reduced is unclear.The purpose of this in vitro study was to evaluate the edge chipping toughness and translucency of translucent zirconia, 3mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP), and lithium disilicate.Two translucent zirconia products, Katana and Lava Esthetic; one 3Y-TZP, Lava Plus; and one lithium disilicate, IPS e.max Press were prepared and tested for phase composition via X-ray diffraction (XRD) (n=3), translucency via a spectrophotometer (n=20), and edge chipping via a universal testing machine with a custom-machined specimen holder and diamond indenter (n=20). The 3Y-TZP and lithium disilicate served as the optimal control materials for edge chipping and translucency, respectively. Translucency was compared with 1-way ANOVA and edge toughness with ANCOVA (α=.05).The XRD showed the 3Y-TZP to be almost completely tetragonal phase compared with the 2 translucent zirconia products that were predominantly cubic. Katana UTML and IPS e.max Press had a statistically similar (P.05) translucency that was significantly (P.05) greater than that of Lava Esthetic and Lava Plus. The edge toughness of Katana UTML was 304 N/mm, IPS e.max Press was 354 N/mm, Lava Esthetic was 394 N/mm, and Lava Plus was 717 N/mm, with significance rankings of Katana UTMIPS e.max Press=Lava EstheticLava Plus.Some translucent zirconias had translucency similar to that of lithium disilicate; however, as translucency increased with increased cubic content, edge toughness decreased. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect