Manufacturing a First Upper Molar Dental Forceps Using Continuous Fiber Reinforcement (CFR) Additive Manufacturing Technology with Carbon-Reinforced Polyamide
| Autor: | Roland Told, Szilárd Rendeki, Attila Pentek, Gyula Marada, Ferenc Jozsef Molnar, Peter Maroti, Bálint Nagy |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Fabrication
Materials science Polymers and Plastics Forceps dental forceps Organic chemistry 3D printing Fused filament fabrication Bending Article QD241-441 Flexural strength Deflection (engineering) Ultimate tensile strength composite Composite material business.industry carbon General Chemistry fatigue test mechanical testing business additive manufacturing CFR (continuous fiber reinforcement) scanning electron microscopy |
| Zdroj: | Polymers Volume 13 Issue 16 Polymers, Vol 13, Iss 2647, p 2647 (2021) |
| ISSN: | 2073-4360 |
| Popis: | 3D printing is an emerging and disruptive technology, supporting the field of medicine over the past decades. In the recent years, the use of additive manufacturing (AM) has had a strong impact on everyday dental applications. Despite remarkable previous results from interdisciplinary research teams, there is no evidence or recommendation about the proper fabrication of handheld medical devices using desktop 3D printers. The aim of this study was to critically examine and compare the mechanical behavior of materials printed with FFF (fused filament fabrication) and CFR (continuous fiber reinforcement) additive manufacturing technologies, and to create and evaluate a massive and practically usable right upper molar forceps. Flexural and torsion fatigue tests, as well as Shore D measurements, were performed. The tensile strength was also measured in the case of the composite material. The flexural tests revealed the measured force values to have a linear correlation with the bending between the 10 mm (17.06 N at 5000th cycle) and 30 mm (37.99 N at 5000th cycle) deflection range. The findings were supported by scanning electron microscopy (SEM) images. Based on the results of the mechanical and structural tests, a dental forceps was designed, 3D printed using CFR technology, and validated by five dentists using a Likert scale. In addition, the vertical force of extraction was measured using a unique molar tooth model, where the reference test was carried out using a standard metal right upper molar forceps. Surprisingly, the tests revealed there to be no significant differences between the standard (84.80 N ± 16.96 N) and 3D-printed devices (70.30 N ± 4.41 N) in terms of extraction force in the tested range. The results also highlighted that desktop CFR technology is potentially suitable for the production of handheld medical devices that have to withstand high forces and perform load-bearing functions. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|