Determination of 14C, 55Fe, 63Ni and gamma emitters in activated RPV steel samples: a comparison between calculations and experimental analysis
Autor: | Antti Räty, Anumaija Leskinen, Susanna Salminen-Paatero, Taneli Iso-Markku, Esa Puukko, Merja Tanhua-Tyrkkö |
---|---|
Přispěvatelé: | Department of Chemistry, Ion exchange for nuclear waste treatment and for recycling |
Rok vydání: | 2019 |
Předmět: |
Characterisation of decommissioning waste
Materials science Health Toxicology and Mutagenesis Nuclear engineering 116 Chemical sciences Public Health Environmental and Occupational Health Radioactive waste 010501 environmental sciences 010403 inorganic & nuclear chemistry Activated RPV steel 01 natural sciences Pollution 0104 chemical sciences Analytical Chemistry Nuclear Energy and Engineering NUCLEAR-WASTE Monte carlo code SEPARATION Radiology Nuclear Medicine and imaging Hpge detector Scaling factor Reactor pressure vessel Spectroscopy 0105 earth and related environmental sciences |
Zdroj: | Leskinen, A, Salminen-Paatero, S, Räty, A, Tanhua-Tyrkkö, M, Iso-Markku, T & Puukko, E 2020, ' Determination of 14C, 55Fe, 63Ni and gamma emitters in activated RPV steel samples: a comparison between calculations and experimental analysis ', Journal of Radioanalytical and Nuclear Chemistry, vol. 323, no. 1, pp. 399-413 . https://doi.org/10.1007/s10967-019-06937-4 |
ISSN: | 1588-2780 0236-5731 |
DOI: | 10.1007/s10967-019-06937-4 |
Popis: | Determination of 14C, 55Fe, 63Ni and gamma emitters in two different types of activated reactor pressure vessel (RPV) steel samples were carried out. The gamma emitters were analysed using HPGe detectors with ISOCS and standard geometry calibrations. Two radioanalytical procedures for the 14C, 55Fe, 63Ni analysis were developed using inactive samples and activated samples were analysed using modified procedures. A Monte Carlo code was used for the modelling of the activation results. The obtained measured and calculated results were comparable. |
Databáze: | OpenAIRE |
Externí odkaz: |