Development Of 3D Woven Fabric Based Pressure Switch
| Autor: | Muhammad Usman Javaid, Yasir Nawab, Muhammad Umair, Khubab Shaker, Muhammad Maqsood |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: |
Conductive yarn
Materials science textile pressure switch conductive yarns Chemical technology Substrate (printing) TP1-1185 Woven fabric Pressure switch General Materials Science Development (differential geometry) Composite material Interlock Electrical conductor Short circuit 3d multilayer fabrics |
| Zdroj: | Autex Research Journal, Vol 15, Iss 2, Pp 148-152 (2015) Autex Research Journal, 15(2), 148-152. The Technical University of Lodz |
| ISSN: | 2300-0929 1470-9589 |
| Popis: | This paper introduces a 3D woven fabric-based approach for the development of pressure switch. A fabric substrate, being elastic and extendable is very useful in addition to its high breaking strength and low cost. The developed resistive-type switch is based on the multilayer interlock 3D fabrics. In the top and bottom layers, certain number of conductive yarns are woven separated by cotton yarns in both transversal and thickness direction. Application of pressure makes the layers of conductive yarn to come in contact, resulting in a short circuit, which may be recorded using multi-meters. Removing the pressure cause the connection points to separate away and it depends on the weave design. Such switch can be used as an on/off switch for usage in security systems, can be sewn into carpets and wearable garments for a number of purposes. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|