Dielectric Analysis of Response Time in Electrorheological Fluids Developed for Medical Devices

Autor:	Alan T. Riga, Tobili Sam Yellowe, Manik Pavan Kumar Maheswaram, Dhanuja D. Perera, Dhruthiman Mantheni, Naullage Indika Perera, M. Ellen Matthews
Rok vydání:	2011
Předmět:	Permittivity Materials science Correlation coefficient Loss factor Analytical chemistry Response time Dielectric Electrorheological fluid Psychiatry and Mental health chemistry.chemical_compound symbols.namesake chemistry Polyaniline symbols Debye
Zdroj:	American Journal of Analytical Chemistry. :85-92
ISSN:	2156-8278 2156-8251
DOI:	10.4236/ajac.2011.22009
Popis:	Three electrorheological fluids (ERFs) of recently synthesized Polyaniline.HCl and Cellulose fluids as well as a commercial product from Fludicon® (Germany), were evaluated with a two-electrode probe unit and by Dielectric Analysis (DEA). The study was a part of an ongoing medical device development project. The dielectric response times were calculated using the critical peak frequency in a corresponding Debye plot of Tan Delta (loss factor/permittivity) vs. log frequency. The DEA revealed the response times (tau, τ) in ms. The Fludicon® ERF was DEA durable (repeat cycles produced same results) and the τ was temperature dependent: 16 ms at 25°C and 0.16 ms at 80°C. The Cellulose ERF was somewhat DEA durable and the τ was 5.5 ms at 25°C and 0.21 ms at 80°C. The response times were logarithmic with the temperature (°C) with a correlation coefficient of >0.98 for the Cellulose and Fludicon® ERFs. The Polyaniline ERF had a τ of 53 ms at 25°C in the 1st DEA run and there was no indication of a τ for the remaining DEA tests.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::ffc6a38a06d030b558fbe88166505b0e https://doi.org/10.4236/ajac.2011.22009 Zobrazit plný text záznamu