Prediction of the Stamped Part Thinning Depending on Its Geometry and Blank Material

Autor:	František Faltýnek, Jan Řiháček, Kamil Podaný
Rok vydání:	2019
Předmět:	Austenite Materials science Computer simulation Thinning Dimple Ansys software Geometry Stamping Blank Industrial and Manufacturing Engineering Finite element method
Zdroj:	Manufacturing Technology. 19:314-320
ISSN:	2787-9402 1213-2489
DOI:	10.21062/ujep/289.2019/a/1213-2489/mt/19/2/314
Popis:	The paper deals with a design of new dimple geometry with a view to minimizing its thinning. In this case, three types of blank materials were analyzed, i.e. ferritic steel X2CrCuTi18, austenitic steel X5CrNi18-10 and austenitic steel X5CrNi18-10 with additional heat treatment. Thinning analysis for different dimple geometry and blank material is performed with a numerical simulation using finite element method in ANSYS software. To verify the accuracy of the numerical simulation, a practical stamping of the part with initial design and comparison between resulting thinning values, which is determined by ANSYS software and experimental microscopic measurement, is also performed.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::ff043382f954b951e94f241b270c2f21 https://doi.org/10.21062/ujep/289.2019/a/1213-2489/mt/19/2/314 Zobrazit plný text záznamu