HETEROGENEOUS HARDENING OF MACHINES PARTS BY SURFACE PLASTIC DEFORMATION
| Autor: | A. V. Makarov, E. Martynov, A. Afonin |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Materials science
0205 materials engineering Complementary and alternative medicine Surface plastic 020502 materials 0211 other engineering and technologies Hardening (metallurgy) Pharmaceutical Science Pharmacology (medical) 02 engineering and technology Composite material 021102 mining & metallurgy |
| Zdroj: | Bulletin of Belgorod State Technological University named after. V. G. Shukhov. :106-112 |
| ISSN: | 2071-7318 |
| DOI: | 10.34031/article_5da46203295c88.35872410 |
| Popis: | The main causes of failure of heavily loaded threads are considered. The methods of increasing the efficiency of the equipment due to the method used are proposed. It is found that improving the operational characteristics of the components of mining and metallurgical machinery can be achieved forming heterogeneous-hardened surface layer. Methods of forming heterogeneous structure by surface plastic deformation (SPD are considered). The importance of identifying the nature of the influence of parameters of heterogeneous hardened layer on the performance of machine parts is indicated. Modeling of process heterogeneous hardening of SPD of the finite element method is executed. Recommendations about application of heterogeneous hardening of SPD for hardening the heavy-duty parts are offered. It is found that the use of different methods SPD allows widely vary the degree of depth and the uniformity of the hardening of machine parts. It is found that this increase in life responsible highly loaded parts operating under fatigue loading due to hardening of the heterogeneous surface layer may reach 1.5 times or more. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|