Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures

Autor:	Helmut Antrekowitsch, Werner Fragner, Florian Stadler, Peter J. Uggowitzer, Helmut Kaufmann
Rok vydání:	2012
Předmět:	Materials science Mechanics of Materials Mechanical Engineering Phase (matter) Alloy Metallurgy Metals and Alloys engineering engineering.material Foundry Hardening effect Eutectic system
Zdroj:	International Journal of Cast Metals Research. 25:215-224
ISSN:	1743-1336 1364-0461
Popis:	In this study, we describe the effect of the main alloying elements Ni, Cu and Mg on the mechanical properties of near eutectic and hypoeutectic Al–Si foundry alloys at 250°C after a long term exposure to test temperature. Systematic compositional variations illustrate the significant hardening effect of secondary precipitates such as Al2Cu and Mg2Si. It is also shown that the strength is increased by the addition of Ni, albeit only to a certain level, depending on the fraction of eutectic phase in the alloy. The alloys are considered as coarse two-phase systems, where a hardening effect is caused by load transfer to the harder phase, which requires a certain contiguity of the latter. This paper discusses the individual influences of Ni, Cu and Mg on the high temperature strength and describes a potentially adverse effect of the combinations Cu/Ni and Cu/Mg.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::fc6db6c7fd87c756a84f7991643f236a https://doi.org/10.1179/1743133612y.0000000004 Zobrazit plný text záznamu Plný text ve formátu PDF Plný text ve formátu HTML
Nepřihlášeným uživatelům se plný text nezobrazuje	K zobrazení výsledku je třeba se přihlásit.