| Popis: |
Although soft electronic materials are of significant importance for flexible electronic devices, most of them are derived from commercial polymer elastomers, such as polydimethylsiloxane, polyurethane and Ecoflex. In this work, citric acid-based degradable polyester elastomers are prepared by a melt polycondensation process, utilizing citric acid, 1,8-octanediol and poly(ethylene glycol) (PEG) as monomers. Furthermore, poly(1,8-octanediol citrate acid) (POC)-PEG/silver nanowire (AgNW) conductive polyester elastomers (CPEs) are prepared by introducing a AgNW layer on the surface of the POC-PEG films. Scanning electron microscopy images reveal that the thickness of the AgNW layer is on the scale of several micrometers and the AgNWs form a continuous conductive network. Upon mechanical stimuli, POC-PEG exhibits recoverable deformation and induces variation in the AgNW conductive network, resulting in a conversion of strain to detectable resistance. When tensile strain is applied, the POC-PEG/AgNW CPEs achieve a gauge factor of 231.6, a response range of 0%-50%, a low response time of 35 ms and high stability. Moreover, the POC-10PEG/AgNW CPE also responds to bending deformation with a gauge factor of 3667.5, a response range of 0%-8.4%, a low response time of 62 ms and high stability. On the basis of strain sensitivity, wireless sensors are further assembled by integrating the POC-PEG/AgNW CPEs into a Bluetooth signal transmission system. Various human motions and physiological activities are successfully monitored using the wireless sensors. The results demonstrate that degradable citric acid-based polyester elastomers/AgNW CPEs are promising materials for next-generation sustainable and flexible electronic devices. |
