Anode resistance reduction of dye-sensitized solar cells using graphene for efficiency improvement
Autor: | Ali Fattah, Mohammad Bavir, Abdollah Abbasi, Ali A. Orouji |
---|---|
Rok vydání: | 2021 |
Předmět: |
Electron mobility
Materials science business.industry Graphene Open-circuit voltage Band gap 02 engineering and technology 021001 nanoscience & nanotechnology 01 natural sciences Atomic and Molecular Physics and Optics Electronic Optical and Magnetic Materials Anode law.invention Dielectric spectroscopy 010309 optics Dye-sensitized solar cell law 0103 physical sciences Optoelectronics Electrical and Electronic Engineering 0210 nano-technology business Short circuit |
Zdroj: | Optical and Quantum Electronics. 53 |
ISSN: | 1572-817X 0306-8919 |
Popis: | In this study, electrochemical impedance spectroscopy of two types of photoanodes made up of TiO2 and graphene–TiO2 (with 6 wt% of graphene) composite are investigated in the dye-sensitized solar cells. In the first experiment, a 7-μm thickness of TiO2 was used as a photoanode. Therefore, the short circuit current (SCC), open circuit voltage (OCV), and efficiency were obtained equal to 6.6 mA, 650 mV, and 3.4%, respectively. Also, the electron lifetime of this experiment in the anode section was obtained 13.2 ms. In the second experiment, graphene–TiO2 composite with 7-μm thickness was used as a photoanode. Graphene, due to its small energy gap (approximately 0.1 ev), is an appropriate material to absorb more photons. Therefore, more electrons participate in generating SCC. So because of low impedance and high carrier mobility of graphene, electrons can move toward the fluorine-doped tin oxide easily, thus avoiding the recombination of electrons with highest occupied molecular orbital holes, resulting in improved efficiency of about 6.97%. The SCC, OCV, and electron lifetime obtained from the second experiment were obtained equal to 16.29 mA, and 690 mV, and 31 ms, respectively. |
Databáze: | OpenAIRE |
Externí odkaz: |