Experimental investigation of small axial hydro-kinetic turbines
| Autor: | D M Bucur, G Dunca, F Bunea, R A Chihaia, I S Grecu, R Mitruţ |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Earth and Environmental Science. 1079:012020 |
| ISSN: | 1755-1315 1755-1307 |
| DOI: | 10.1088/1755-1315/1079/1/012020 |
| Popis: | In the present paper the prototypes of small axial hydro-kinetic turbines are designed, built and tested in laboratory conditions in order to demonstrate their operability. The hydrokinetic turbine prototypes have a 0.2 m tip diameter, three blades and are meant to be used in a free water stream flowing with 1 m/s velocity. Two geometries of the turbine runner are studied in order to determine the best correlation between the water flow velocity and the cross-sectional area of the turbine. The 3D designs of the turbine are used for the prototype printing in order to obtain a lightweight compact assembly of reduced dimensions. The experimental measurements are conducted in a closed-loop laboratory setup, specially designed for hydro-kinetic turbines prototypes testing. The flow velocity, runner speed and shaft torque are measured. The aim of the experimental testing is to determine the characteristic parameters for the tested turbines as power coefficient and mechanical power output. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|