Express Model for Load Sharing and Stress Analysis in Helical Gears
| Autor: | Claude Gosselin, Louis Cloutier, Raynald Guilbault |
|---|---|
| Rok vydání: | 2004 |
| Předmět: |
Engineering
business.industry Mechanical Engineering Finite strip method Design tool Finite difference method Structural engineering Bending Deflexion Computer Graphics and Computer-Aided Design Finite element method Computer Science Applications Contact mechanics Mechanics of Materials business Fillet (mechanics) |
| Zdroj: | Journal of Mechanical Design. 127:1161-1172 |
| ISSN: | 1528-9001 1050-0472 |
| DOI: | 10.1115/1.1992509 |
| Popis: | The performance of a gear set is strongly influenced by the manufacturing and assembly quality. Therefore, detailed analyses at the design stage, where the effects of expected assembly and manufacturing errors can be simulated, are crucial. At an early design stage, when contact conditions are addressed, the widely used finite element method (FEM) may still result in unwanted computing time. The paper presents an Express model developed to serve as a fast design tool offering fine simulation and a high precision level. The model establishes load sharing, fillet stresses and pressure distribution along the contacting surfaces of meshing helical gear teeth. The calculations combine the finite strip method with a pseudo-three-dimensional (3D) model of the tooth base solved with finite differences to calculate tooth bending deflexion and fillet stresses. The accuracy of the procedure is demonstrated through 3D FEM models. A contact cell discretization completes the model. This very fast and accurate approach gives the contact pressure distributions resulting from the roll-slide motion of mating teeth. An analysis of a helical gear set in two different assembly positions reveals the effects of edge contact, and exhibits the influence of tooth stiffness reduction near tooth corners. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|