Study of strontium-doped tricalcium silicate/hydroxyapatite composite cement prepared through sol–gel process

Autor: Senthilkumar Thirumurugan, Yu-Chien Lin, Guan-Yi Lin, Kuei-Sheng Fan, Yung-He Liang, Yi-Jie Kuo, Ren-Jei Chung
Rok vydání: 2022
Zdroj: Journal of the Australian Ceramic Society. 58:1357-1366
ISSN: 2510-1579
2510-1560
Popis: A composite cement made of strontium containing tricalcium silicate and hydroxyapatite (SrC3S/HAp) was prepared and studied through a two-stage sol–gel method. The elemental components are 75 wt% of strontium-doped tricalcium silicate (SrC3S) and 25 wt% of hydroxyapatite (HAp). According to previous studies, the SrC3S has good mechanical properties and hydraulic conductivity, and the HAp has good biocompatibility. Therefore, the 75SrC3S-25HAp powder with 10 wt% of NaH2PO4 solution was mixed to prepare the slurry material. This slurry was measured for the working time and setting time at 37 °C under saturated vapor pressure. The material properties were evaluated in terms of crystal structures, surface morphologies, and mechanical properties. The in vitro testing was conducted to determine the ion release rate and curing behavior under a simulated body fluid environment. Finally, the L929 murine fibroblast cells were cultured to study the biocompatibility of the material. The results indicated that the operating time was 15.2 min, and the setting time was 43.6 min. After being soaked into simulated body fluid for14 days of the experiment, the compressive strength of 75SrC3S-25HAp remained 22.1 MPa, and the release of calcium and strontium ions was 501.4 ppm and 49.5 ppm, respectively. The cell viabilities were higher than 70% in various concentrations. These results suggest the 75SrC3S-25HAp has excellent potential for bone cement application.
Databáze: OpenAIRE
Externí odkaz: