Finite-Element Simulation of Steckel Mill Rolling
| Autor: | Volodymyr Kukhar, Eduard Klimov, Oleksandr Kurpe |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Materials science
business.industry Mechanical Engineering 02 engineering and technology Structural engineering 021001 nanoscience & nanotechnology Finite element simulation 020303 mechanical engineering & transports 0203 mechanical engineering Mechanics of Materials Steckel mill General Materials Science 0210 nano-technology business |
| Zdroj: | Key Engineering Materials. 887:564-574 |
| ISSN: | 1662-9795 |
| Popis: | In the paper the research has been performed to obtain the stress distribution through the thickness of the rolled products along the deformation zone in the conditions of roughing rolling and in the conditions of quasi-stationary temperature distribution during finishing rolling at the Steckel mill. The research has been performed by the simulation based on the Abaqus CAE 6.14-2 software and analytical modeling of the hot rolling process of coils at the Steckel mill with dimensions of 15 mm × 1500 mm, made of steel grade S355JR+AR, according to the requirements of EN 10025-2. The obtained deviations of the rolling force between simulation, analytical modeling and actual data have comparable results and a similar trend of changes through the passes, the average value of which does not exceed 1.54 % and - 1.77 %. The beginning of the continuous layer formation of equivalent stress during roughing rolling has been determined, and, accordingly, the beginning of the deformation penetration through the entire thickness of the semi-rolled product has been also determined that occurs in the pass 6 when reduction equals 14 %. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|