Vibration of the rotating rectangular orthotropic Mindlin plates with an arbitrary stagger angle
| Autor: | Firooz Bakhtiari-Nejad, Hamid Reza Rostami, Ahmad Rahbar Ranji |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
0209 industrial biotechnology
Cantilever Materials science business.industry Mechanical Engineering Aerospace Engineering 02 engineering and technology Structural engineering First order Orthotropic material Vibration 020303 mechanical engineering & transports 020901 industrial engineering & automation 0203 mechanical engineering Mechanics of Materials Automotive Engineering Plate theory General Materials Science Galerkin method business |
| Zdroj: | Journal of Vibration and Control. 25:1194-1209 |
| ISSN: | 1741-2986 1077-5463 |
| Popis: | In this article, the vibration analysis of rotating moderately thick cantilever orthotropic plate is analytically investigated. Based on the first order shear deformation plate theory, the partial differential equations of motion are derived using Hamilton’s principle. The centrifugal inertia forces and Coriolis effects due to the rotation are all considered. The analytical approaches, both extended Kantorovich method and extended Galerkin method, are employed to obtain the solution of the problem. Results obtained by these two methods are compared with those available in the open literature and good agreements are observed. The effects of various parameters, individually or in combination, on the vibrational behaviors are analyzed in detail. From the studies, it is found that in the rotating plates, when the stiffness ratio increases, the crossing/veering phenomenon occurs in the lower mode orders and/or rotation speeds. The results show that for each stiffness ratio, the effect of hub radius ratio is more significant on the out-of-plane mode frequencies than on the in-plane ones. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|