| Autor: |
R. A. Kusin, E. N. Eremin, A. R. Kusin, Iryna Charniak, A.Ph. Ilyushchankа |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Proceedings of Higher Educational Institutions. Маchine Building. :24-34 |
| ISSN: |
0536-1044 |
| DOI: |
10.18698/0536-1044-2021-10-24-34 |
| Popis: |
The article considers three methods of increasing the distribution uniformity of properties over the filtration area of powder filter materials at different stages of their manufacturing. It is shown that granulation of metal powders with a pore former increases the uniformity of permeability distribution over the filtration area by a factor of 2.3–3.5. Dry radial isostatic pressing ensures high distribution uniformity of properties, while the coefficient of variation of local permeability does not exceed 0.17. Radial compression allows increasing the uniformity of permeability distribution over the filtration area by 15 ... 22 % compared to that for the original powder filter materials. The selection of the method used in practice is determined by the shape, size and properties of the manufactured products and initial powders. The considered methods can be used in petrochemical engineering for the manufacture of porous powder products for filtering purposes, used to trap catalyst particles, filters for fine and coarse fuel and oil purification. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
