| Popis: |
The relevance of research in the development of physical methods for increasing the stability of products made of polymer composite materials (PCM) to the influence of environmental factors, taking into account its duration, is shown. The influence of exposure of carbon fiber samples on an epoxy matrix in the natural conditions of the climate zone of Saratov on the change in the limit stresses of three-point bending was studied. Comparative tests of samples premodified in a microwave electromagnetic field with a frequency of 2.45 GHz with an energy flux density (17…18)×104 µw/cm2 were performed. It is shown that the influence of environmental factors leads to a decrease in the limit stresses by (3,7…10,4) % depending on the exposure. Modification of carbon fiber in the cured state in the microwave electromagnetic field reduces the negative influence of the external environment by reducing the strength by (44.3…73) %. It was found that the strengthening effect of microwave modification increases with increasing exposure from 6 % to 11.5 % under the accepted experimental conditions, while the uniformity of the bending strength values in the batch increases significantly, which is manifested in a decrease in the coefficient of variation of limit stresses by (70.2…77.8) %. Functional dependencies in the form of 2nd-order polynomials are obtained, allowing with confidence (98…99) % predict the stability of products made of modified carbon fiber during long-term operation under the influence of environmental factors. |
