Minimization of energy and surface roughness of the products machined by milling
| Autor: | Imane Rezgui, M Bouakba, Abderrahim Belloufi, M Abdelkrim |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Consumption (economics)
Computer science business.industry 020208 electrical & electronic engineering 02 engineering and technology Energy consumption 020401 chemical engineering Machining 0202 electrical engineering electronic engineering information engineering Surface roughness Carbon footprint Production (economics) Minification 0204 chemical engineering Process engineering business Energy (signal processing) |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 227:012016 |
| ISSN: | 1757-899X 1757-8981 |
| Popis: | Metal cutting represents a large portion in the manufacturing industries, which makes this process the largest consumer of energy. Energy consumption is an indirect source of carbon footprint, we know that CO2 emissions come from the production of energy. Therefore high energy consumption requires a large production, which leads to high cost and a large amount of CO2 emissions. At this day, a lot of researches done on the Metal cutting, but the environmental problems of the processes are rarely discussed. The right selection of cutting parameters is an effective method to reduce energy consumption because of the direct relationship between energy consumption and cutting parameters in machining processes. Therefore, one of the objectives of this research is to propose an optimization strategy suitable for machining processes (milling) to achieve the optimum cutting conditions based on the criterion of the energy consumed during the milling. In this paper the problem of energy consumed in milling is solved by an optimization method chosen. The optimization is done according to the different requirements in the process of roughing and finishing under various technological constraints. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|