Removal of Fluoride from Aqueous Solution using Calcium Peroxide as a Low-cost Adsorbent
Autor: | Parwathi Pillai, Swapnil Dharaskar, Hitesh Panchal |
---|---|
Rok vydání: | 2020 |
Předmět: |
Aqueous solution
Chemistry Aqueous two-phase system Langmuir adsorption model Infrared spectroscopy 02 engineering and technology General Chemistry 010501 environmental sciences 01 natural sciences Isothermal process symbols.namesake chemistry.chemical_compound Adsorption 020401 chemical engineering Calcium peroxide symbols 0204 chemical engineering Fluoride 0105 earth and related environmental sciences Water Science and Technology Nuclear chemistry |
Zdroj: | Journal of Water Chemistry and Technology. 42:329-338 |
ISSN: | 1934-936X 1063-455X |
Popis: | Removal of fluorides from water is essential for humans and animals because it causes dental and bone deficiency. The maximum permissible limit of fluoride is 1.5 mg/L, according to the World Health Organization. Recently it became known that countries like Pakistan, India, Sri Lanka, China, Argentina, etc. have high fluoride concentration in groundwater. In the present work, calcium peroxide nanoparticles adsorption behaviour and its fluoride removal efficiency from an aqueous phase was studied. Adsorption technique was used to concentrate fluoride on the adsorbent. The advantage of using adsorption is that it is a technique which is easy to implement and relatively cheap. To characterise the structure, size and morphology of adsorbent nanoparticles, Fourier-transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy with energy dispersion X-ray spectroscopy, and Raman spectroscopy were applied. In batch adsorption experiments, the process parameters varied were: pH (2–12); contact time (5–60 min); adsorbent dosage (0.05–1 g); concentration (10–100 mg/L), and temperature (5–60°C). The kinetic study has shown that the experimental data are consistent with pseudo second order model with the regression coefficient of 0.99. The adsorption equilibrium is best describable by Langmuir isotherm model with adsorption capacity of 89.6 mg/g. The process thermodynamic was also studied to confirm the proposed mechanism of fluoride adsorption on the adsorbent. The isothermal multistage adsorption was investigated to understand the mechanism of calcium peroxide nanoparticle adsorption for fluoride removal. The maximum fluoride adsorption capacity calculated for CaO2 was 89 mg/g, with 90% defluoridation efficiency. The results suggested that calcium peroxide nanoparticles can be considered as a promising adsorbent for fluoride removal. |
Databáze: | OpenAIRE |
Externí odkaz: |