Experimental Investigation and Analytical Prediction of σ-Phase Precipitation in AISI 316L Austenitic Stainless Steel
Autor: | Habib Sidhom, Habib Sahlaoui |
---|---|
Rok vydání: | 2013 |
Předmět: | |
Zdroj: | Metallurgical and Materials Transactions A. 44:3077-3083 |
ISSN: | 1543-1940 1073-5623 |
DOI: | 10.1007/s11661-013-1647-5 |
Popis: | The phase precipitation in industrial AISI 316L stainless steel during aging for up to 80,000 hours between 823 K and 1073 K (550 °C and 800 °C) has been studied using transmission electron microscopy, scanning transmission electron microscopy, and carbon replica energy-dispersive X-ray microanalysis. Three phases were identified: Chromium carbides (M23C6), Laves phase (η), and σ-phase (Fe-Cr). M23C6 carbide precipitation occurred firstly and was followed by the η and σ-phases at grain boundaries when the aging temperature is higher than 873 K (600 °C). Precipitation and growth of M23C6 create chromium depletion zones at the grain boundaries and also retard the σ-phase formation. Thus, the σ-phase is controlled by the kinetic of chromium bulk diffusion and can appear only when the chromium reaches, at grain boundaries and at the M23C6/γ and M23C6/η/γ interfaces, content higher than a critical value obtained by self-healing. An analytical model, based on equivalent chromium content, has been established in this study and successfully validated to predict the time–temperature–precipitation diagram of the σ-phase. The obtained diagram is in good agreement with the experimental results. |
Databáze: | OpenAIRE |
Externí odkaz: |