Performance verification test of coaxial centrifugal clutch for motorcycle transmission system

Autor: Zih-Chun Dai
Rok vydání: 2021
Předmět:
Zdroj: Journal of Physics: Conference Series. 2141:012008
ISSN: 1742-6596
1742-6588
DOI: 10.1088/1742-6596/2141/1/012008
Popis: With the popularization of motorcycles, the demand for motorcycles is getting higher and higher. Therefore, the improvement of power output, the reduction of pollutants discharged, the replacement of waste, the improvement of efficiency and the reduction of fuel use, are also relatively important. Stop-and-go on urban driving will keep the clutch in a state of being engaged and not engaged. The clutch cannot be engaged and is constantly worn. The output efficiency of the CVT belt-type continuously variable transmission system clutch used in the transmission is only about 70~80%. Transmission efficiency. Furthermore, since the traditional CVT belt-type system clutch mainly relies on the action of the centrifugal roller to change the reduction ratio, when encountering different driving conditions and need to accelerate and decelerate, this will make the working area of the internal combustion engine in an unstable state. The matching structure between the automatic clutch weight and the telescopic spring in the reciprocating separation state and the fitted state is replaced, which effectively reduces the problem of uneven contact surfaces of the plates in the past, and prevents the elastic aging from affecting the uniform transmission of power, resulting in the entire dry clutch The life span of the engine is improved and the efficiency of power transmission is maintained, thereby reducing fuel consumption and producing more complete engine power. Therefore, the “Design Performance Verification of Coaxial Contact Centrifugal Ball Clutch” is proposed mainly to verify that the coaxial contact centrifugal ball clutch has better performance than the CVT belt-type clutch.
Databáze: OpenAIRE
Externí odkaz: