Increasing wear resistance of austenitic stainless steel by anodic plasma electrolytic nitrocarburising

Autor:	T. L. Mukhacheva, S. A. Silkin, Pavel N. Belkin, S. V. Burov, S. A. Kusmanov, I. G. D’yakov
Rok vydání:	2020
Předmět:	Wear resistance History Materials science Metallurgy engineering Plasma Electrolyte Austenitic stainless steel engineering.material Computer Science Applications Education Anode
Zdroj:	Journal of Physics: Conference Series. 1713:012031
ISSN:	1742-6596 1742-6588
DOI:	10.1088/1742-6596/1713/1/012031
Popis:	The effect of plasma electrolytic nitrocarburising on the wear resistance of 12Cr18Ni10Ti steel was investigated. The phase composition of the modified layer and the surface morphology were studied using X-ray analysis and scanning electron microscope. The wear of the specimens was determined with dry friction of the lateral surface of a cylindrical specimen against a bearing steel disc (60 HRC). It is shown that anodic PEN/C of steel samples results in the formation of a hardened layer with a microhardness up to 370 HV due to its saturation with nitrogen and carbon followed by quenching. The wear resistance of steel enhances by 8.5 times after treatment in a solution of carbamide (12 wt. %) and ammonium chloride (10 wt. %) at 800 °C for 5 min with quenching in an electrolyte.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::f1840069a5825dda24f3f3d1233adee3 https://doi.org/10.1088/1742-6596/1713/1/012031 Zobrazit plný text záznamu