An automated lab-scale flue gas permeation membrane testing system at the National Carbon Capture Center

Autor: David Hopkinson, Christina R. Myers, Victor A. Kusuma, John O’Connor, Kevin P. Resnik, Ganpat J. Dahe, Justin H. Anthony, Shan Wickramanayake, Surendar R. Venna
Rok vydání: 2017
Předmět:
Zdroj: Journal of Membrane Science. 533:28-37
ISSN: 0376-7388
DOI: 10.1016/j.memsci.2017.02.051
Popis: A constant pressure, mixed gas permeation testing skid was deployed at the National Carbon Capture Center to test membrane performance when continuously exposed to slipstream post-combustion flue gas. Small, laboratory scale membranes can be loaded for testing and the degree of automation allowed the skid to be run unattended for several weeks at a time. In this report, we share our experience in commissioning the skid and quantifying CO2, N2 and O2 permeances of several membranes during the first round of testing. Dense films of polydimethylsiloxane and poly(bistrifluoroethoxyphosphazene) were tested with flue gas for approximately 20 h each. In addition, we successfully tested four thin film composite hollow fiber membranes made by a dip coating process, consisting of porous Torlon hollow fibers coated with a selective layer of poly(bistrifluoroethoxyphosphazene) or its mixed matrix with a metal organic framework SIFSIX-Cu-2i filler particles. Initial results suggest the polydimethylsiloxane showed comparable results to the literature data, but the coated hollow fiber membranes have lower CO2 permeances relative to N2 or O2 permeances compared to their performance under idealized, dry, contaminant-free mixed gas conditions. While quantification of H2O permeance was performed, we found it was affected by concentration polarization even with small membrane area and a low stage cut.
Databáze: OpenAIRE
Externí odkaz: