Influence of heat treatment on the formation of ultrafine-grained structure of Al–Li alloys processed by SPD
| Autor: | Anna Urbańczyk-Gucwa, Kinga Rodak, Magdalena, Barbara Jabłońska, Jacek Pawlicki, Jaroslaw Mizera, Magdalena Jabłońska |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
010302 applied physics
Materials science Scanning electron microscope Mechanical Engineering Alloy Metallurgy 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Microstructure 01 natural sciences 0103 physical sciences Vickers hardness test Scanning transmission electron microscopy engineering Dislocation Severe plastic deformation 0210 nano-technology Civil and Structural Engineering Electron backscatter diffraction |
| Zdroj: | Archives of Civil and Mechanical Engineering. 18:331-337 |
| ISSN: | 1644-9665 |
| DOI: | 10.1016/j.acme.2017.06.007 |
| Popis: | In this study, binary Al–2.3wt%Li alloy, ternary Al–2.2wt%Li–0.1wt%Zr alloy and quaternary Al–2.2wt%Li–0.1wt%Zr–1.2wt%Cu alloy in the solution treated condition and additionally in aging condition were severely plastically deformed by rolling with cyclic movement of rolls (RCMR) method to produce ultrafine grained structure. Scanning transmission electron microscopy (STEM), scanning electron microscopy with EBSD detector (SEM/EBSD) were used for microstructural characterization and hardness test for a preliminary assessment of mechanical properties. The results shows, that the combination of aging treatments with RCMR deformation can effectively increase the hardness of Al–Li alloys. Second particles hinders the annihilation of dislocations in Al matrix during deformation leading to an increase of dislocation density. Significant amount of nanometric second particles in refined structure to ultrafine scale especially in Al–2.2wt%Li–0.1wt%Zr–1.2wt%Cu alloy effectively prevents the formation of high angle boundaries. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink