CORROSION PERFORMANCE OF PLASMA SPRAYED ALUMINA–40 wt.% TITANIA COATED HIGH-DENSITY GRAPHITE IN MOLTEN LiCl–KCl EUTECTIC SALT
| Autor: | JAGADEESH SURE, D. SRI MAHA VISHNU, U. KAMACHI MUDALI |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Surface Review and Letters. |
| ISSN: | 1793-6667 0218-625X |
| DOI: | 10.1142/s0218625x22400030 |
| Popis: | The corrosion performance of plasma sprayed alumina–40[Formula: see text]wt.% titania (A40T) coated high-density graphite was investigated in molten LiCl–KCl eutectic salt at [Formula: see text]C for periods of 500, 1000, and 2000[Formula: see text]h under argon atmosphere. The microstructural and compositional investigations of corrosion-tested A40T coatings by scanning electron microscopy and energy dispersive X-ray spectroscopy showed that the samples exhibited better corrosion resistance up to 500[Formula: see text]h. The poor corrosion behavior and failure of A40T coating from graphite substrate in the long-term (1000 and 2000[Formula: see text]h) immersion was discussed in detail based on the microstructure and composition analysis. The phases existing in the as-sprayed coating ([Formula: see text]-Al2TiO5, [Formula: see text]-Al2O3, R-TiO2, and [Formula: see text]-Al2O3) remained in the detached coating after 1000[Formula: see text]h exposure to the molten salt. The reaction between molten salt and A40T coating was not evident from XRD analysis. A40T coatings with chromium carbide–nichrome (Cr3C2–NiCr) bond coat showed complete spallation of the top coating and oxidation of the bond coat as evident from the X-ray diffraction analysis. Detachment of the A40T coating occurred due to the penetration of the molten salt into the coating through the voids and pores present on the surface, which weakened the adhesion strength between the substrate and the A40T coating or top coat-bond coat interfaces. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|