Polyaniline-coated coconut fibers: Structure, properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Autor: Adriana Silveira, Guilherme M. O. Barra, Thiago Medeiros Araujo, Alessandro Pegoretti, Débora Pereira Schmitz, Claudia Merlini, Sílvia D.A.S. Ramôa
Rok vydání: 2014
Předmět:
Zdroj: Polymer Testing. 38:18-25
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2014.06.005
Popis: Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl 3. 6H 2 O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10 −1 and 1.9 × 10 −2 S cm −1 for composites prepared with FeCl 3 .6H 2 O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.
Databáze: OpenAIRE
Externí odkaz: