Electrodeposition of nano crystalline cobalt oxide on porous copper electrode for supercapacitor

Autor: R. N. Emerson, M. Kalyani
Rok vydání: 2018
Předmět:
Zdroj: Journal of Materials Science: Materials in Electronics. 30:1214-1226
ISSN: 1573-482X
0957-4522
DOI: 10.1007/s10854-018-0389-y
Popis: The cobalt oxide thin films were prepared by electrodeposition methods on to porous copper substrate. As-deposited films were obtained as Co3O4 films with the help of heat treatment at 300 °C for 2 h. Their structural and surface morphological properties were investigated by using X-ray diffraction, Fourier transformation analysis and field emission scanning electron micrograph (FESEM), atomic force microscope, energy dispersive X-ray analysis techniques (EDAX). The X-ray diffractogram reveals the formation of cobalt hydroxide CoOOH with orthorhombic crystal structure and cobalt oxide Co3O4 with cubic crystal structure. The FESEM micrographs confirms the morphology of prepared films, also EDAX spectra confirms the presence of Co and O elements of the solid films. The electrochemical performance of the films was studied in aqueous 1 M KOH electrolyte using cyclic voltammetry. The cyclic voltammograms exhibits symmetric nature and increase in capacitance with respect to the film thickness. The maximum specific capacitance of cobalt hydroxide CoOOH is 602 F g−1 and cobalt oxide Co3O4 is found to be as 630 F g−1. The above investigation shows that low-cost cobalt oxide electrode can be a potential application in supercapacitor.
Databáze: OpenAIRE
Externí odkaz: