Effects of ballistic impact damage on fatigue crack initiation in Ti–6Al–4V simulated engine blades
| Autor: | Steven R. Thompson, Janine Birkbeck, W.J. Porter, Christine M Martinez, Daniel Eylon, Theodore Nicholas, John J. Ruschau |
|---|---|
| Rok vydání: | 2002 |
| Předmět: |
Leading edge
Materials science Turbine blade business.industry Mechanical Engineering Structural engineering Radius Condensed Matter Physics Fatigue limit law.invention Foreign object damage Mechanics of Materials Residual stress law General Materials Science Composite material business Ballistic impact Stress concentration |
| Zdroj: | Materials Science and Engineering: A. 325:465-477 |
| ISSN: | 0921-5093 |
| Popis: | The ingestion of debris into jet engines creates nicks and dents on the leading edges of blades and vanes. This is commonly known as foreign object damage (FOD). Such damage, which can often result in premature failure, was simulated in the laboratory using diamond cross-section axial fatigue samples that were impacted with 1 mm diameter glass beads at 305 m s −1 at either 0 or 30° angle of incidence. The samples had either a thin leading edge (LE) with a radius of 0.127 mm or a thick LE with a radius of 0.381 mm. Fatigue strength of impacted specimens showed degradation of 10–50% due to LE damage, regardless of the depth of the damage zone. FOD related impact notch depth, loss of material (LOM), shear, folds, embedded shattered glass, and microstructural damage were characterized by SEM. Fatigue strength degradation was found to be higher for the 30° impacts than for the 0° impacts. No clear correlation between notch depth or LE thickness and fatigue strength was found. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect