Identification of multi-degree of freedom non-linear systems using an extended modal space model
Autor: | Jan R. Wright, M. F. Platten, Jonathan E. Cooper, Grigorios Dimitriadis |
---|---|
Rok vydání: | 2009 |
Předmět: |
Signal processing
Mechanical Engineering System identification Aerospace Engineering Degrees of freedom (mechanics) Computer Science Applications Nonlinear system Identification (information) Modal Control and Systems Engineering Control theory Signal Processing Curve fitting Restoring force Civil and Structural Engineering Mathematics |
Zdroj: | Mechanical Systems and Signal Processing. 23:8-29 |
ISSN: | 0888-3270 |
DOI: | 10.1016/j.ymssp.2007.11.016 |
Popis: | The identification of non-linear dynamic systems is an increasingly important area of research, with potential application in many industries. Current non-linear identification methodologies are, in general, mostly suited to small systems with few degrees of freedom (DOF) and few non-linearities. In order to develop a practical identification approach for real engineering structures, the capability of such methods must be significantly extended. In this paper, it is shown that such an extension can be achieved using multi-exciter techniques in order to excite specific modes or DOF of the system under investigation. A novel identification method for large non-linear systems is presented, based on the use of a multi-exciter arrangement using appropriated excitation applied in bursts. This proposed non-linear resonant decay method is applied to a simulated system with 5 DOF and an experimental clamped panel structure. The technique is essentially a derivative of the restoring force surface method and involves a non-linear curve fit performed in modal space. The effectiveness of the resulting reduced order model in representing the non-linear characteristics of the system is demonstrated. The potential of the approach for the identification of large continuous non-linear systems is also discussed. |
Databáze: | OpenAIRE |
Externí odkaz: |