Evaluation of Wear Properties of Heat-treated Al 7075/Graphite Powder/Bagasse ash Hybrid Metal Matrix Composites
| Autor: | H K Shivanand, M G Madhu, Maibusab, H A Shivaraj, B G Sumana |
|---|---|
| Rok vydání: | 2019 |
| Předmět: | |
| Zdroj: | International Journal of Scientific Research in Science and Technology. :201-210 |
| ISSN: | 2395-602X 2395-6011 |
| DOI: | 10.32628/ijsrst1196338 |
| Popis: | This research work investigated the in?uence of graphite powder on the wear behavior of Al 7075/Graphite Powder (Gr)/Bagasse ash (BA) hybrid composite. The investigation reveals the effectiveness of incorporation of graphite powder in the composite for gaining wear reduction. The Al 7075 (Aluminium alloy 7075) reinforced with graphite powder and Bagasse ash were investigated. The conventional liquid casting technique was used for the fabrication of composite material and subjected to T6 heat treatment. The reinforcement content was chosen as 1, 3, and 5wt. % of graphite powder to identify its potential for self-lubricating property under dry sliding conditions. Hybrid composite is processed at 1wt% of Gr with 2, 4 and 6wt% of BA. The effect of load on dry sliding wear rate and coefficient of friction performance of Al 7075 casting alloy and its composites was evaluated by using a pin-on-disc with two different loads with constant speed at room temperature. Wear tests were conducted by using pin on disc apparatus to evaluate the tribological behaviour of the composite and to determine the optimum content of graphite powder for its minimum wear rate. The wear rate decreases with addition of graphite powder content and reaches its minimum at 5wt. % graphite. The coefficient of friction decreases with addition of graphite content and was found to be minimum at wt. 5% graphite. The wear properties of the hybrid composites containing graphite exhibited the superior wear-resistance properties. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|