| Autor: |
Gangqi Dong, Yongjie Wang, Panfeng Huang, Rongsheng Li |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Chinese Journal of Aeronautics. 35:287-295 |
| ISSN: |
1000-9361 |
| DOI: |
10.1016/j.cja.2021.08.014 |
| Popis: |
Forward and backward reaching inverse kinematics (FABRIK) is an efficient two-stage iterative solver for inverse kinematics of spherical-joint manipulator without the calculation of Jacobian matrix. Based on FABRIK, this paper presents an incremental control scheme for a free-floating space manipulator consists of revolute joints and rigid links with the consideration of joint constraints and dynamic coupling effect. Due to the characteristics of FABRIK, it can induce large angular movements on specific joints. Apart from that, FABRIK maps three dimensional (3D) problem into two dimensional (2D) problem by a simple geometric projection. This operation can cause infinite loops in some cases. In order to overcome these issues and apply FABRIK on space manipulators, an increments allocation method is developed to constrain the angular movements as well as to re-orient the end-effector. The manipulator is re-positioned based on the momentum conservation law. Instead of pure target position tracking, the orientation control of the end-effector is also considered. Numerical simulation is performed to testify and demonstrate the effectiveness and reliability of the proposed incremental control approach. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
