CFD modelling of supercritical water reforming of glycerol for hydrogen production
Autor: | Ana-Maria Cormos, Calin-Cristian Cormos, Ionela-Dorina Dumbrava, Árpád Imre-Lucaci |
---|---|
Rok vydání: | 2022 |
Předmět: |
Packed bed
Biodiesel Materials science Hydrogen Renewable Energy Sustainability and the Environment Energy Engineering and Power Technology chemistry.chemical_element Condensed Matter Physics Residence time (fluid dynamics) Supercritical fluid chemistry.chemical_compound Fuel Technology chemistry Chemical engineering Glycerol Hydrogen production Syngas |
Zdroj: | International Journal of Hydrogen Energy. 47:12147-12158 |
ISSN: | 0360-3199 |
Popis: | Glycerol, as a main by-product of biodiesel synthesis, can be used in a large variety of applications including food, personal care, pharmaceutical and chemical industries However, due to the large production of biodiesel, the glycerol market was depressed. The conversion of glycerol into an energy carrier (syngas or hydrogen) could be a very interesting route to providing value as a renewable energy source. The reforming of glycerol leads to an almost complete conversion and very high carbon-to-gas efficiency with short residence time. In this work, the performances of packed bed reactor for hydrogen production from glycerol in supercritical conditions, by using a Ni-based catalyst supported on Al2O3 and SiO2, through CFD modelling in three-dimensions were studied. The parameters of kinetic model were determined by using an optimization method to fit the experimental data. The developed model was been validated based on experimental results published in literature for three different feed concentration of glycerol of 5, 10 and 20 wt% (R2 = 0.969). Varying the reaction temperature, between 500 and 800 °C, and residence time, between 1.5 and 10 s, the concentration of hydrogen increased with increasing the temperature and decreasing the residence time. At high temperature, the hydrogen can achieve a concentration of 65% and the present of methane is less than 5% and carbon monoxide maintain lower concentration. The simulation results show that high hydrogen yield can be obtained in short residence time with conversion of glycerol almost completed. |
Databáze: | OpenAIRE |
Externí odkaz: |