An experimental study on creep deformation of thin-walled tubes under pure bending
| Autor: | Chun-Huei Fan, Chien-Min Hsu |
|---|---|
| Rok vydání: | 2000 |
| Předmět: |
Materials science
Physics::Instrumentation and Detectors Mechanical Engineering technology industry and agriculture Thin walled Building and Construction Tube specimen Curvature stomatognathic system Creep Mechanics of Materials Condensed Matter::Superconductivity Pure bending Moment (physics) Tube (fluid conveyance) Composite material Civil and Structural Engineering |
| Zdroj: | Structural Engineering and Mechanics. 9:339-347 |
| ISSN: | 1225-4568 |
| DOI: | 10.12989/sem.2000.9.4.339 |
| Popis: | The creep deformation of pure bending (hold constant moment for a period of time) tests were conducted in this paper. Thin-walled tubes of 304 stainless steel were used in this investigation. The curvature-ovalization measurement apparatus, designed by Pan rt nl. (1998), was used for conducting the present experiments. It has been found that as soon as the creep deformation is started, the magnitudes of the tube curvature and ovalization of tube cross-section quickly increase. The magnitudes of the creep curvature and ovalization of tube cross-section increase fast with a higher hold moment than that with a lower one. Owing to the continuously increasing curvature during the creep deformation, the tube specimen buckles eventually. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|