Fluid flows in microchannels with cavities
| Autor: | Zeta Tak For Yu, Yi-Kuen Lee, Yitshak Zohar, Man Wong |
|---|---|
| Rok vydání: | 2005 |
| Předmět: |
Flow visualization
Microchannel Chemistry Mechanical Engineering Analytical chemistry Physics::Optics Reynolds number Mechanics Flow measurement Volumetric flow rate Physics::Fluid Dynamics symbols.namesake Hele-Shaw flow Fluid dynamics symbols Mass flow rate Physics::Accelerator Physics Electrical and Electronic Engineering |
| Zdroj: | Journal of Microelectromechanical Systems. 14:1386-1398 |
| ISSN: | 1057-7157 |
| DOI: | 10.1109/jmems.2005.859086 |
| Popis: | Pressure-driven gas and liquid flows through microchannels with cavities have been studied using both experimental measurements and numerical computations. Several microchannels with cavities varying in shape, number and dimensions have been fabricated. One set of microdevices, integrated with sensors on a silicon wafer, is used for flow rate and pressure distribution measurements in gas flows. Another set of microdevices, fabricated using glass-to-silicon wafer bonding, is utilized for visualization of liquid flow patterns. The cavity effect on the flow in the microchannel is found to be very small, with the mass flow rate increasing slightly with increasing number of cavities. The flow pattern in the cavity depends on two control parameters; it is fully attached only if both the reduced Reynolds number and the cavity number are small. A flow regime map has been constructed, where the critical values for the transition from attached to separated flow are determined. The numerical computations reveal another control parameter, the cavity aspect ratio. The flow in the cavity is similar only if all three control parameters are the same. Finally, the vorticity distribution and related circulation in the cavity are analyzed. [1546]. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|