Prestressing low clinker structural concrete elements by ultra-high modulus carbon fibre reinforced polymer tendons

Autor: Tobias Dominik Lämmlein, Giovanni Pietro Terrasi, Pietro Lura, Janis Justs
Rok vydání: 2021
Předmět:
Zdroj: Materials and Structures. 54
ISSN: 1871-6873
1359-5997
Popis: The combination of low clinker high-performance concrete (LCHPC) and ultra-high modulus (UHM) carbon fibre reinforced polymer (CFRP) tendons was recently proposed for prestressed structural elements. The 70% reduction in cement content resulting in limited creep and shrinkage of the LCHPC in comparison to a conventional high-performance concrete (HPC) and the very high UHM-CFRP tendon stiffness (> 509 GPa) were expected to impact the mechanical behaviour of such structures. This study focuses on the behaviour of 3 m-long beam specimens during prestressing, concrete hardening and in 4 point-bending experiments. Fibre optic sensors were implemented inside the CFRP tendons to measure strain during those stages and a digital image correlation system was employed to monitor the 4-point-bending tests. After 28 days, the LCHPC recipe, despite a 70% cement reduction and much smaller environmental footprint, did not show measurable differences in the prestress loss behaviour in comparison to a conventional HPC. The UHM-CFRP prestressing tendons, because of their stiffness, showed both higher prestress losses of around 40% and on average a nearly doubled prestress transfer length. However, they increased the beam`s maximum load-bearing capacity by 21% and showed 47% less deflection at failure in comparison to beams prestressed with the standard modulus (UTS)-CFRP tendons.
Databáze: OpenAIRE
Externí odkaz: