Effects of molecular weight and grafted maleic anhydride of functionalized polylactic acid used in reactive compatibilized binary and ternary blends of polylactic acid and thermoplastic cassava starch

Autor: Susan Selke, Ramani Narayan, Rafael Auras, Sukeewan Detyothin, Maria Rubino
Rok vydání: 2015
Předmět:
Zdroj: Journal of Applied Polymer Science. 132
ISSN: 0021-8995
DOI: 10.1002/app.42230
Popis: Polylactic acid (PLA) was reactively functionalized with maleic anhydride (MA) and 2,5-bis(tert-butylperoxy)−2,5-dimethylhexane (Luperox 101 or L101) using a twin screw extruder (TSE). The effects of functionality (grafted MA level) and/or number average molecular weight of functionalized PLA (PLA-g-MA) as the reactive polymer pairs (binary blends) and reactive compatibilizer (ternary blends) were investigated. Due to the dominant side reaction during melt free radical grafting, polymer degradation or chain scission, PLA-g-MA having a higher grafted MA had lower molecular weights and intrinsic viscosity as well as broader molecular weight distribution values. The thermal, physical, mechanical, and morphological properties of binary blends produced by using the TSE and injection molding at a ratio of 70 wt % PLA-g-MA and 30 wt % thermoplastic cassava starch (TPCS) were analyzed. The reactive blends having grafted MA more than 0.4 wt % had poor tensile strength and elongation at break. Similar trends in morphology and tensile properties were observed in the reactive ternary blends. The use of PLA-g-MA strongly impacted the elongation at break but not the modulus or tensile strength. An increase of PLA-g-MA's number average molecular weight ( M¯n or Mn) improved the tensile properties of the blends. The reactive ternary blend having 0.1 wt % grafted MA on PLA and PLA-g-MA basis and PLA-g-MA's Mn of 45 kDa offered the highest elongation at break. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42230.
Databáze: OpenAIRE
Externí odkaz: