Optical in-process height measurement system for process control of laser metal-wire deposition

Autor: Yasuhiro Takaya, Morita Daiji, Hiroyuki Kawano, Nobuhiro Shinohara, Shigeru Takushima, Yasuhiro Mizutani
Rok vydání: 2020
Předmět:
Zdroj: Precision Engineering. 62:23-29
ISSN: 0141-6359
DOI: 10.1016/j.precisioneng.2019.11.007
Popis: We propose an in-process height measurement system for a weld bead and feedback control system for wire-feeding speed for high-quality laser deposition. Metal additive manufacturing, especially laser metal-wire deposition, is effective for complex shape fabrication and repair processing. However, we must control the gap between a weld bead and a feed wire in an optimal range for high-quality deposition. Conventionally, the Z-stage pitch for multi-layer deposition must be precisely adjusted by each deposition shape. In this paper, we design an in-process height measurement system that is integrated in a laser processing head, which measures the weld bead height by a line section method. We decreased the influence of the intense thermal radiation generated from a melt pool by inserting the band-pass filter of the line beam's wavelength in the imaging system and optimizing its line laser power. Consequently, our system can measure the weld bead height near the melt pool, which is 4 mm in front of it. Next we show that our proposed system can measure the weld bead height during wire-laser metal deposition with 50-μm accuracy by comparing its value to the true value. Finally, we achieved a cylinder shape deposition of 50-mm height, regardless of the Z-stage pitch and the cylinder diameter of the multi-layer deposition, by controlling the wire-feeding speed based on the measured weld bead height.
Databáze: OpenAIRE
Externí odkaz: