Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components

Autor: Jens Kruse, Ludger Overmeyer, Laura Budde, Vannila Prasanthan, Berend Denkena, Malte Stonis, Bernd Breidenstein, Marius Lammers, Bernd-Arno Behrens, Jörg Hermsdorf, Thomas Hassel, Mohamad Yusuf Faqiri
Rok vydání: 2021
Předmět:
Zdroj: The International Journal of Advanced Manufacturing Technology. 119:119-136
ISSN: 1433-3015
0268-3768
Popis: Due to the increased integration of functions, many components have to meet high and sometimes contradictory requirements. One way to solve this problem is Tailored Forming. Here, hybrid semi-finished products are manufactured by a joining or cladding process, which are then hot-formed and finished. For the design of hybrid components for a possible later industrial application, knowledge about properties of hybrid components is required. In this paper it is investigated how the respective process steps of the Tailored Forming process chain change the surface and subsurface properties of the applied cladding layer. For this purpose, shafts made of unalloyed steel are provided with a high-alloy austenitic steel X2CrNiMo19-12 cladding by laser hot-wire cladding. Subsequently, hot forming is carried out by cross-wedge rolling and the finishing by turning and deep rolling. After each process step, the subsurface properties of the cladding such as microstructure, hardness and residual stress state are examined. Thus, the influence of different process steps on the subsurface properties in the process chain of manufacturing hybrid shafts can be analyzed. This knowledge is necessary for the specific adjustment of defined properties for a required application behavior.
Databáze: OpenAIRE
Externí odkaz: