| Autor: |
Yury Shebeko, A. V. Zuban, Aleksey Shebeko |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Pozharnaia bezopasnost`. |
| ISSN: |
2411-3778 |
| DOI: |
10.37657/vniipo.2020.98.1.002 |
| Popis: |
Проанализирована взаимосвязь разброса значений пределов огнестойкости стальных конструкций со вспучивающимися огнезащитными покрытиями и соответствующего этому разбросу интервала толщины огнезащитного покрытия. Предложена методика, на основании которой может быть осуществлен выбор необходимой толщины огнезащитного покрытия в зависимости от заданных значений дисперсии предела огнестойкости и приведенной толщины конструкции при заданной доверительной вероятности.An analysis of a relationship between fire resistance limits scatter for steel structures coated with intumescent fire retardant coating and an appropriate interval of thicknesses of the coating was carried out. A methodology for the determination of this relationship was proposed. This methodology was tested on a practical example. A steel structure with a reduced thickness of 6 mm was considered. A typical dependence of the required thickness of the structure was taken into account. A ratio of a mean square deviation of the fire resistance limit to this limit was accepted to be equal 0.1. Using these values an appropriated interval of the thicknesses of the intumescent fire retardant coating was determined. This interval can be calculated for any given confidence level. Boundaries of this interval can be not symmetric in relation to the value of the normative thickness of the fire retardant coating. The proposed methodology can be used for the determination of the required thicknesses of the intumescent fire retardant coatings on steel structures for the given r value, reduced thickness of the structure and the confidence level. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
