| Autor: |
José Luis Burguera, Marcela Burguera, Edwin A. Hernández-Caraballo |
| Rok vydání: |
2002 |
| Předmět: |
|
| Zdroj: |
Spectrochimica Acta Part B: Atomic Spectroscopy. 57:2159-2165 |
| ISSN: |
0584-8547 |
| Popis: |
A method for the determination of total selenium in serum samples by graphite furnace atomic absorption spectrometry was evaluated. The method involved direct introduction of 1:5 diluted serum samples (1% v/v NH 4 OH+0.05% w/v Triton X-100 ® ) into transversely heated graphite tubes, and the use of 10 μg Pd+3 μg Mg(NO 3 ) 2 as chemical modifier. Optimization of the modifier mass and the atomization temperature was conducted by simultaneously varying such parameters and evaluating both the integrated absorbance and the peak height/peak area ratio. The latter allowed the selection of compromise conditions rendering good sensitivity and adequate analyte peak profiles. A characteristic mass of 49 pg and a detection limit (3s) of 6 μg 1 −1 Se, corresponding to 30 μg l −1 Se in the serum sample, were obtained. The analyte addition technique was used for calibration. The accuracy was assessed by the determination of total selenium in Seronorm™ Trace Elements Serum Batch 116 (Nycomed Pharma AS). The method was applied for the determination of total selenium in ten serum samples taken from individuals with no known physical affection. The selenium concentration ranged between 79 and 147 μg l −1 , with a mean value of 114±22 μg l −1 . |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect