Thermal conductivity of natural rubber nanocomposites with hybrid fillers
Autor: | Wei Li, Junping Song, Kai-yan Tian, Lianxiang Ma, Li Xiteng, Shi-Chune Yao |
---|---|
Rok vydání: | 2019 |
Předmět: |
Environmental Engineering
Materials science Nanocomposite General Chemical Engineering 02 engineering and technology General Chemistry Carbon nanotube Carbon black 021001 nanoscience & nanotechnology Thermal conduction Biochemistry law.invention Thermal conductivity 020401 chemical engineering Natural rubber law visual_art Ultimate tensile strength visual_art.visual_art_medium 0204 chemical engineering Fourier transform infrared spectroscopy Composite material 0210 nano-technology |
Zdroj: | Chinese Journal of Chemical Engineering. 27:928-934 |
ISSN: | 1004-9541 |
DOI: | 10.1016/j.cjche.2018.09.019 |
Popis: | Natural rubber nanocomposites filled with hybrid fillers of multi-walled carbon nanotubes (CNTs) and carbon black (CB) were prepared. CNTs were ultrasonically modified in mixture of hydrogen peroxide (H2O2) and distilled water (H2O). The functional groups on the surface of CNTs, changes in nanotube structure and morphology were characterized by Fourier transform infrared spectroscopy (FT-IR), Raman Spectroscopy, and transmission electron microscopy (TEM). It shows that hydroxyl (OH ) is successfully introduced. The surface defects of modified CNTs were obviously higher than those of original CNTs, and the degree of agglomeration was greatly reduced. Thermal conductivity of the composites was tested by protection heat flow meter method. Compared with unmodified CNTs/CB filling system, the thermal conductivity of hybrid composites is improved by an average of 5.8% with 1.5 phr (phr is parts per hundred rubber) of hydroxyl CNTs and 40 phr of CB filled. A three-dimensional heat conduction network composed of hydroxyl CNTs and CB, as observed by TEM, contributes to the good properties. Thermal conductivity of the hybrid composites increases as temperature rises. The mechanical properties of hybrid composites are also good with hydroxyl CNTs filled nanocomposites; the tensile strength, 100% and 300% tensile stress are improved by 10.1%, 22.4% and 26.2% respectively. |
Databáze: | OpenAIRE |
Externí odkaz: |